Summary Reader Response Draft #3
The guidebook titled, “Design for Manufacturing and Assembly (DfMA) Prefabricated Prefinished Volumetric Construction” released by the Building and Construction Authority of Singapore (BCA) (2017) explains the features of Prefabricated Prefinished Volumetric Construction (PPVC), a construction method that heavily involves off-site construction. Construction modules that consist of several units are manufactured in factories complete with interior finishes such as walls or toilet fixtures. The modules are then transported to the site and installed onto the building in a “Lego-like” (BCA, 2017, Introduction section, para. 3) manner. In accordance with Hwang et al. (2018), PPVC is unique as compared to other construction methods as construction can be done concurrently, saving cost and time. PPVC has gained popularity worldwide due to this reason and university campuses in the United States have adopted PPVC as a way to build dormitories or classrooms efficiently (Hwang et al., 2018). In Singapore, PPVC is the main approach in constructing buildings such as HDB flats and university dormitories. One such example is the North Hill Residential Halls of Nanyang Technological University, as mentioned in the Global Brands Magazine website (“NTU builds Singapore’s”, 2018). BCA has been encouraging PPVC as the main form of construction in Singapore even making it mandatory for certain land parcels under the “Government Land Sales Program” (Hwang et al., 2018, p. 170).
PPVC should be encouraged by the Singapore
government due to its clean means of construction and increased productivity.
However, critics argue that its high initial cost of construction could deter
cities from employing PPVC as a construction method.
PPVC should be encouraged by the government
due to its clean means of construction. According to Pons et al. (2011), the
built environment industry causes environmental damage due to its usage of non-renewable
fuel sources and its inability to recycle materials. In traditional on-site
construction, materials are used with the intent of using them once. After the
building has surpassed its use, construction materials will go to waste. According
to a construction waste management proposal document written by the European
Commission (2015), Spain produced 27 million tons of construction waste in 2012
and 32% of this waste ends up in landfills. On the other hand, the National Environmental Agency of Singapore
(NEA) (2022), reported that Singapore has a combined construction waste of
1,421 tons. However, almost 99 percent of this waste are recycled. This is due
to good recycling practices in Singapore as well as the high usage of PPVC. Thus,
if the Singapore government continues to encourage the use of PPVC in
construction projects, even less construction waste will end up in landfills. Shen
et al. (2011) mentioned that precast concrete slabs could be recycled when
constructing temporary construction works, thus leading to cleaner means of
construction. Similarly, Kang et
al. (2023), reported on a new method of recycling concrete waste in Singapore
by transforming waste into precast concrete walls thus reducing waste and leading
to cleaner means for construction.
Another reason why PPVC should be encouraged
is due to its increase in productivity. according to Ong and Yahya (2016), the
use of PPVC and off-site construction allows for better productivity. On-site
activities such as pouring concrete and waiting for it cure takes time. As
mentioned by Ong and Yahya (2016), ‘majority of on-site activities are replaced
by more efficient, faster factory processes, construction time can be shortened
with the increased labour productivity’ (Ong et al., 2016, p. 70). Better
productivity leads to shorter construction time and construction projects could
be constructed at a faster rate saving time and money.
Despite the various advantages that PPVC
offers, it does have its challenges as well. Kamali and Hewage (2016) state
that high initial cost could be a reason why companies are not keen on using
PPVC as a construction method. A large initial capital will be needed to source
for suitable machinery and workers to run a PPVC manufacturing plant. In
countries such as Singapore, companies have a large capital to be able to
afford PPVC as a means for construction. However, for companies in developing
parts of the world with insufficient capital, they may choose to stick to
traditional on-site construction methods due to cheap labour. The lack of experience
professionals with experience in PPVC could also deter companies from employing
the use of PPVC, which is the case in China (Chao et al., 2013).
In conclusion, there is adequate evidence to
support the benefits of PPVC and why the Singapore government has been
encouraging the use of it. PPVC technologies have caused a breakthrough in the
construction industry due to its numerous productivity and cost benefits amongst
other contributing factors. However, companies must decide carefully if they
should use PPVC due to its limiting factors such as its high initial cost. Ultimately,
the invention of modular construction methods could be highly useful in the
near future and this technology could be improved on to form better
construction methods.
References
Building
Construction Authority of Singapore (2018). Design for Manufacturing and
Assembly (DfMA) Prefabricated Prefinished Volumetric Construction. https://www1.bca.gov.sg/docs/default-source/docs-corp-news-and-publications/publications/for-industry/ppvc_guidebook.pdf
European Commission. (2015, May 26). Construction
and Demolition Waste management in Spain. https://ec.europa.eu/environment/pdf/waste/studies/deliverables/CDW_Spain_Factsheet_Final.pdf
Hwang,
B.-G., Shan, M., & Looi, K. Y. (2018). Knowledge-based decision support
system for prefabricated prefinished volumetric construction. Automation
in Construction, 94, 168-178. https://www.sciencedirect.com/science/article/abs/pii/S0926580517311044
Kang, J.,
Ng, Y. B., & Phua, W, L. (2023, Mar. 02). Joe Green makes concrete go
green. The Business Times. https://www.businesstimes.com.sg/singapore/smes/joe-green-makes-concrete-go-green
Kamali, M.,
& Hewage, K. (2016). Life cycle performance of modular buildings: A
critical review. Renewable and Sustainable Energy Reviews, 62,
1171–1183.
https://www.sciencedirect.com/science/article/abs/pii/S1364032116301411
Mao, C.,
Shen, Q., Pan, W., & Ye, K. (2013). Major Barriers to Off-Site
Construction: The Developer’s Perspective in China. Journal of Management in
Engineering, 31(3).
https://ascelibrary.org/doi/full/10.1061/%28ASCE%29ME.1943-5479.0000246?casa_token=cQxIsKN0PEgAAAAA%3AavSntlunI7HY2rREf9vfZnKB1M9seHryy9LLQ7ct4Nyi91dxnoHhFRumgT7jDuB1C1Sy-ykYRyeYkdA
NTU builds Singapore’s first “Lego-style”
high-rise residences. (2016, January 12). Global Brands Magazine. https://www.globalbrandsmagazine.com/ntu-builds-singapores-first-lego-style-high-rise-residences/
National
Environmental Agency of Singapore. (2022). Waste Statistics and Overall
Recycling. https://www.nea.gov.sg/our-services/waste-management/waste-statistics-and-overall-recycling
Pons, O.,
& Wadel, G. (2011). Environmental impacts of prefabricated school buildings
in Catalonia. Habitat International, 35(4), 553-563. https://www.sciencedirect.com/science/article/abs/pii/S0197397511000191
Rui, O. Y.,
& Yahya, K. (2016). The Productivity Rate of Prefabricated Pre-Finished
Volumetric Construction (PPVC). https://civil.utm.my/wpcontent/uploads/2016/12/The-Productivity-Rate-of-Prefabricated-Pre-Finished-Volumetric-Construction-PPVC.pdf
Shen, L.,
Tam, V. W., & Li, C. (2009). Benefit analysis on replacing in situ
concreting with precast slabs for temporary construction works in pursuing
sustainable construction practice. Resources, Conservation and Recycling,
53(3), 145–148.
https://www.sciencedirect.com/science/article/abs/pii/S0921344908001997?fr=RR-2&ref=pdf_download&rr=855dba085e3c1904
Comments
Post a Comment